he X4 Pro Low Edition Quadcopter with 1-Axis Gimbal from Hubsan boasts an expected flying time - fully laden with a gimbal and camera (camera available separately) - of up to 27 minutes, depending on conditions. Additionally, with all cargo removed (including the gimbal and any camera) flights of up to 40 minutes become possible. This bundle is classed ready-to-fly (RTF), meaning all essential hardware is included and only basic assembly - such as attaching the props with the included prop wrench - is required. The bundle includes a 2.4 GHz FPV (handheld controller) with built-in 5.8 GHz video receiver and video monitor.

As with other multi-rotor systems, it features a GPS based flight control system. The enables very precise positioning, which is especially important when recording video, and provides enhanced flight stability compared to relying on gyro/IMU data alone. Thanks to the ground station system integrated into the transmitter, waypoint navigation is also possible. With this technology, you simply plot a point-to-point rout over a map using the device's touchscreen. If you change your mind, the waypoint course can be updated in-flight.

Along with the quadcopter, transmitter, camera, and gimbals, this bundle includes a 7000mAh 3S LiPo flight battery, a battery from the transmitter, a battery charger, a prop wrench, a set of prop guards, and antennas for the transmitter and video receiver.

Hubsan HBS1080P 1080p Action Camera
For recording Full HD footage from that air the HBS1080P action camera is included. In addition to 1080p video at 30 fps it can take JPEG still as up to 4032 x 3024 resolution. It features an ultra-wide angle lens providing an FOV of up to 170°
Two 1-Axis Gimbals for Camera and Smartphone Mounting
The bundles features two mounting solutions. The first works with the included HBS1080P 1080p action camera as well as GoPro HERO cameras. While the second allows you to catch aerial shots with a smartphone

Air System Design

Removable Props Guards
The guards help protect the propellers from collisions as well as add an additional element of safety

FPV Transmitter with 5.8 GHz Video Receiver

2.4 GHz Radio System
The control signal from the transmitter to the aircraft is sent over a 2.4 GHz frequency, avoiding interference from/with the 5.8 GHz video signal. The transmitter boasts a range of up to 3280.8'
Auto Fixed Hover
When released, the throttle sticks automatically return to the middle. At this point, the X4 Pro will stand in a fixed hover until the pilot takes control again
FPV Transmitter
The bundle includes an FPV transmitter with built-in screen for viewing a live feed from the HBS1080P camera

Flight Control System Functions

Return-to-Home (RTH)
Automatically bring the quadcopter back to a pre-defined "home point" with the flip of switch. The aircraft will also return home automatically if contact with the transmitter is ever lost
Headless Mode - Intuitive Orientation
In this mode there is no longer a defined "noise" and "tail". Instead the aircraft always moves relative to the pilot - forward pressing forward, left pressing left, and so on. This keeps flying more intuitive, especially for beginner pilots
Altitude Mode
In this mode the quadcopter will maintain a fixed elevation. Right/left, back/front movement is still possible, however
Position Mode
This mode uses GPS to maintain a fixed position when the pilot releases the controls

Built-In Parachute w/ Redundant Battery

    In the event of collision, loss of stability, or other failure, the parachute is designed to deploy automatically, helping ensure the X4 returns to 0 AGL safely. The parachute is reusable and can be removed and replaced if needed. It is powered by a separate 380 mAh battery to ensure operation even if the flight battery has died.

    Ask a question

    Note: HTML is not translated!

    Hubsan X4 Pro Low Edition

    • Brand: Hubsan
    • Product Code: Hubsan X4 Low
    • Availability: In Stock
    • $616.65
    • $348.85


    Tags: hubsan, quadcopter, hd, camera, x4